Material:
230 M07 Pb leaded low carbon steel equivalent. 95 Mn Pb 28K, tensile
strength 430-500N/mm2.
Protective Finish:
Zinc plated and yellow passivated.
GI & GIL Clevises:
- Similar to DIN 71802
- GI Clevises, machined for precision, are avaliable in both standard and long series
- Cross hole deburred on all four faces to facilitate assembly of clevis pin
- Sizes up to GIL625 are compatible with ESI Spring Pins on Data Sheet ESI or NBI Clevis Pins on Data Sheet NBI
- Sizes GI750 and GI1000 are used with DEI Pins on Data Sheet DEI
- Inch sizes are easily identified by the groove on the tail
- Please contact us if you have a Clevis application where the connection rod may run into the slot
- Metric sizes of this range are shown on Data Sheet GM
- We wlcome enquiries for left hand threads and non-standard Clevise
| Part # | Thread UNF K |
A | Ø B + .024/ - .000 |
Width C Nominal |
D | E | F | Ø G | H | Weight /100 in Kgs |
| GI 187 | 10-32 | 0.375 | 0.1875 | 0.1875 | 0.394 | 1.024 | 0.394 | 0.354 | 0.295 | 0.9 |
| GIL 187 | 0.787 | 1.417 | 1.2 | |||||||
| GI 250 | 1/4 | 0.500 | 0.250 | 0.250 | 0.472 | 1.220 | 0.472 | 0.394 | 0.354 | 1.6 |
| GIL 250 | 0.945 | 1.693 | 2.1 | |||||||
| GI 312 | 5/16 | 0.630 | 0.3125 | 0.3125 | 0.630 | 0.654 | 0.630 | 0.551 | 0.472 | 3.7 |
| GIL 312 | 1.260 | 2.283 | 5.0 | |||||||
| GI 375 | 3/8 | 0.750 | 0.375 | 0.375 | 0.787 | 2.047 | 0.787 | 0.708 | 0.591 | 6.8 |
| GIL 375 | 1.575 | 2.834 | 9.6 | |||||||
| GI 500 | ½ | 1.000 | 0.500 | 0.500 | 1.102 | 2.834 | 1.102 | 0.945 | 0.886 | 16.7 |
| GIL 500 | 2.205 | 3.976 | 1.141 | 23.8 | ||||||
| GI 625 | 5/8 | 1.250 | 0.625 | 0.625 | 1.260 | 3.268 | 1.260 | 1.024 | 0.945 | 27.6 |
| GIL 625 | 2.520 | 4.528 | 39.6 | |||||||
| GI 750 | 3/4 | 1.575 | 0.750 | 0.750 | 1.575 | 4.134 | 1.575 | 1.339 | 1.181 | 58.5 |
| GI 1000 | 1 | 1.970 | 1.000 | 1.000 | 1.969 | 5.197 | 1.969 | 1.654 | 1.417 | 109.0 |